SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

set ti parameter in wincc to PID FB41 in S7

5/5/2009 3:35 PM	Rate (0)
bseb214 Posts: 4 Rating: (0)	Hi i nahe problem with set ti parametr from wincc to s7 program. what format should i use or how to do this. i want to set time in wincc i/o field and read this in program s7 best regards Seba
bseb214 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

5/5/2009 4:10 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 1/16/2026 Posts: 12481 Rating: (2722)	Hello seba; The parameter TI in FB41 is a TIME datatype. actually, this is a 32-bit ineger value that represents milliseconds. So first use in yourFB41 call in the PLCa register formatted as a TIME datatype for the input to the TI parameter, either in a DBx.DBDx or a MDxx register. Then in WinCC use an Unsigned 32-bit value (linked to your TIME register in the PLC) that you will multiply by 1000 inyour I/O fieldbefore transfering to the PLC . So if the operator writes the value 15 in the I/O field, the PLC will see 15000, and automatically convert it to T#15s in your FB41 call. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

5/5/2009 4:16 PM	Rate (0)
bseb214 Posts: 4 Rating: (0)	Thanks i will check this
bseb214 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

5/5/2009 9:17 PM	Rate (0)
rogermanrique Posts: 67 Rating: (22)	you can also use a real data format as described in this thead. best regards.
rogermanrique Posts: 67 Rating: (22)
Suggestion To thank Quote Answer

Share this page:

Share this page on...