Navigation
Connecting to Sinumerik 802D SL TM Plus: One or more instructions or operands is not supported by this version of the software
Created by: @KINGOFPLC at: 1/17/2025 6:27 AM (1 Replies)
Rating 
Thanks 0
2 Entries
| 1/17/2025 6:27 AM | |
Joined: 1/7/2025 Last visit: 5/6/2025 Posts: 2 Rating:
|
I am connecting to the Sinumerik 802D SL TM Plus machine with the programming tool 802, but I cannot load the program into it. I am getting the error shown in the image during the load. ------------------------------------------------------------------------------------------ |
Last edited by: Moderator_Lan at: 01/17/2025 07:54:42New subject after splitting |
|
| 1/17/2025 7:41 PM | |
Joined: 10/17/2007 Last visit: 9/9/2025 Posts: 4443 Rating:
|
What kind communication cable you use to do this job. do you know you communication is good? If you withdraw the cable you wil have this error or NOT
|
|
If you like my comments please |
|
Follow us on