Karnan

Hai APC techteam,

I have tested what you mentioned in previous mail, but i didnt get any result ..

I am attaching the code i have developed

Please check it and help ..

Thanks&Regards,
Raj

in DB1007.DBB1001Bit 0 TO 6 NUMBER FORPrglist 1dez -> user List
3dez -> oem List
Bit 7 always 1

you WRITE 84hex Bit 7 = 1 Bit 0 TO 6 4dez ?????


in DB1007.DBB1002 NUMBER OF Programm out of LIST 1 TO 100 user list
200 TO 255 oem list

in DB1007.BBB100 Bit 7 Part program selection

in DB1007.DBB2000
Signals from the operating software -> PLC
BIT7 6 5 3 2 1
Selection Loading Unloading Active Error OK

Karnan

Is there any setting in parameter except MD51041 ?

Raj

pleas take a screenshot (<Ctrl> + <P>)of the Programm list and PLC Program

Karnan

Hai APC Tech Team,

I am attaching the screen shots of Program list,Parameter set and PLC program..

Thanks&Regards,
Raj

Karnan

One thing i have to clarify, how we clasifying user list and OEM list,and what is the importance?
Is it possible to hide the program list without effecting program selection?

Thanks&Regards,
Raj

12.13.1 Program selection from the PLC

Function

The NC program to be executed can be specified via the PLC. The names of the NC

programs are entered in program lists.

There are two types of program lists that are dependent on the access level where NC

programs are combined into different files for SINUMERIK Operate:

1. user: Editing possible by the user (access level 3).

2. manufacturer: Editing possible only by the manufacturer (access level 1).