Hi Kahl!

I spent a lot of research. And found this:
info
and I test this in TIA (simulating), and into the simulating alarm logging is working!

Hello Kahl

I have tested it with my KTP600 Basic Color PN Testpanel.

When i poweroff the Panel and after one minute I set it on Power again theAlarmpuffer is still alive.

so i still can see my Alarm Events in my Alarm View Control.

Create a new project for testing like me. Create a new internal tag and a discrete Alarm for testing with this trigger

Create a new Screen and a AlarmView Control. Set At General at Alarm buffer.

create also a IO Field with internal TriggerTag for Alarm.

Then do the test in Runtime.

- start - set trigger to 1- set trigger to 0- two events are displayed in alarmBuffer view. -poweroff- poweron- look again at Alarmview. the two events are still there.

So i Think the alarm Buffer is retentive!

Bye Murof

Hi!

Thanks for the info!

We shipped this unit last year but I will try to do a test in Runtine.