Hello Everyone,

Do anybody have the PDFs for following siemens training. I need to study both of them to complete my journey as an automation engineer.

The sharing of documents from Siemens training courses is illegal, since Siemens has the copyright on these documents.

Check out the official documents:
http://w3.siemens.com/mcms/sce/en/advanced_training/training_material/tia-portal/Pages/default.aspx

Hello mumar;

Siemens uses those documents as part of their official training classes, and as mentioned by ixo65 they are not available freely.

However, Siemens does provide the following tutorials on Simatic Manager and  TIA Portal( v12 and v13):

S7-1200 (TIA PORTAL) TUTORIALS:

https://www.automation.siemens.com/mcms/sce/en/advanced_training/training_material/TIA-Portal-Module/Pages/Default.aspx

This is how the TIA Portal v13 tutorials are introduced:

The curriculums on TIA Portal V13 have a modular structure and cover the topics “Hardware Configuration”, “Example Processes”, “Basics of PLC Programming”, “Advanced Programming” and “Visualization“. They are designed for the SIMATIC controllers S7-1500, S7-1200 and S7-300.

I am confident that you can learn much from this source, enough to familiarize yourself with the programming environment and get at ease with the different programming tools.

Hope this helps,

Daniel Chartier

Guys, I got your point.but PDFs of Programming 1(ST-7PRO1) and Programming 2 (ST-7PRO2) for PLC S7-300 are easily available on the internet. They are also official training of Siemens.

No matter how you see it, no one will provide you with official documents from Siemens in this forum.

If you can download somewhere else, this is your thing.
If there are official links Siemens, it is also fine.