Hello.

I have a ready project with CPU 1214C + HMI KTP 600 basic color pn, the project had done with Tia V13 Upd4 (without any SP). I`ve uploaded project from CPU and backup from panel. 

Now i need add a PC station to this project, I have WinCC Runtime Professional V14 , and also I have Tia V13 Upd4.

What is the best way to add a pc station. I afraid of loosing a connection between CPU and the panel, if I try to redownload a PLC with added PC station. I mean that I want to add pc station in that project that i have uploaded and then download to the CPU?

How can I link PC station to that CPU is there any issue with OPC?

schufri

Hi AlePa,

If i understand correct you have a TIA V13 Up4 project with CPU1214C + KTP600
You want to add a PC-general -> PC Station or you want to a SIMATIC HMI application or any Controller application ?

WinCC Professional V13.0 SP1
https://support.industry.siemens.com/cs/ww/en/view/109096785
10.5.6 PC systems with WinCC Runtime

Best regards
schufri

 

I want to add pc general with winCC professional V14 (and I also have V13 if necessary). That PC will be ran with WinCC Runtime.