pvlinh64vn

 

PISCEAN 2010

Hello,

It s good, now you can go on line.

From your attached pdf & description, it looks like you are checking in status/symbol table. You need to check logic in Ladder Diagram (same as electrical circuit diagram) which is just below the chart. To see the Ladder,  you can see NETWORK 2 with some elements like ALARM, MD etc. etc. Check what sets ALARM 700000 i.e. V16000000.0 bit high in ladder circuit & not in table.

HTH

P.S. - Or you can attach your project here, so forum members could check the same & help you to sort out the problem.

 Hi Friend,

Thank you so much.

I'm attach file please help me.

you can change file.txt to file.rar

Thank

Linh

Hi Friend.

i check it;s activated in subroutine 31 USR_INI in

the project file SAMPLE.PTP. The same subroutine is empty in library file
SUBR_LIBRARY_802SC.PTP.

i don't know why it's lost.

do you have project for lathe cnc machine 802c base line?

please send me if you have.

my email: Ldtech.ae@gmail.com

Thank

Linh

Dear All,

I already fix alarm  700000.it's on scr user.and it lost defaut cycle.i load it;s by wincpin.

Thank so much for All support

Regard

Linh