Skip to Content

support.automation.siemens.com | Technical Forum | Monday, September 1, 2025 7:01:47 PM

Print

CP441-2

Created by: Lekon at: 1/9/2017 9:34 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/9/2017 9:34 AM	Rate (0)
Lekon Posts: 70 Rating: (0)	Dear all expert, I have problem on the CP441-2 with the celox lab III [mean can't comunication]. in the HW configuration I am not access the module CP441 and appear massage like this "Not all information about selected module can be evaluated" I want to ask what it's mean that massage? Thanks.
Lekon Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

1/9/2017 3:30 PM	Rate (0)
Piotr.M Platinum Expert Joined: 6/24/2013 Last visit: 8/21/2025 Posts: 1693 Rating: (433)	Have You installed all required software packages? Some modules (for example fast counter FM350) do came with a CD with a software package which must be installed to configure the module.

Suggestion To thank Quote Answer

1/10/2017 1:54 AM	Rate (0)
Lekon Posts: 70 Rating: (0)	I am not install the software package. Ok expert thanks for your information. Best regard
Lekon Posts: 70 Rating: (0)
Suggestion To thank Quote Answer

1/10/2017 10:38 AM	Rate (0)
Kaulquappe Posts: 3093 Rating: (324)	Hello Lekon, the software package is also available for download. Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (324)
Suggestion To thank Quote Answer