Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

HSC

Created by: GVT at: 1/11/2013 8:27 AM (7 Replies)

Rating (0)

Thanks 2

8 Entries

1/11/2013 8:27 AM	Rate (0)
GVT Posts: 15 Rating: (0)	Hi. I would like to know, how i can set the high speed counter, to read speed (rpm). One more question.. Why the first hsc is i0.0, and second hsc is i0.2? I cant use the i0.1? Thank you..
GVT Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

1/11/2013 12:01 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 11/13/2024 Posts: 229 Rating: (28)	Hello, Here some samples and tricks.. /tf/WW/en/Posts/72458 All the best
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Denilson Pegaia

1/11/2013 12:12 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 11/13/2024 Posts: 229 Rating: (28)	Hello I forgot your last question... See here about fixed inputs...S7-1200 System Manual., All the best
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

1/11/2013 1:24 PM	Rate (0)
GVT Posts: 15 Rating: (0)	Thank you. I have one question. Is you projectCOUNTER_AND_PULSES_PER_MIN.zip the same like when I set HSC on frequency and mesuring period one second? Thank you
GVT Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

1/11/2013 1:26 PM	Rate (0)
GVT Posts: 15 Rating: (0)	* 60 of course..
GVT Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

1/11/2013 2:28 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 11/13/2024 Posts: 229 Rating: (28)	Hello, Yes, it's the same thing...It work too. All the best
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer

1/15/2013 12:50 PM	Rate (0)
GVT Posts: 15 Rating: (0)	Thank you gabriel. What is the direction of the frequency, when I have HSC set on frequency (1sec). Thank you. Best regards
GVT Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

1/15/2013 12:59 PM	Rate (0)
Gabriel de Oliveira Bronze Member Joined: 2/16/2011 Last visit: 11/13/2024 Posts: 229 Rating: (28)	GVT Thank you gabriel. What is the direction of the frequency, when I have HSC set on frequency (1sec). Thank you. Best regards Hello, Don't wonry about couter direction when use frequency mode. I prefer user Counter Single fase to count up the pulses and calculate the frequency in a cyclic function (fixed time call). Regards
	Gabriel de Oliveira It Works? Rate It.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Denilson Pegaia

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on