Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Release monitoring Error

Created by: DineshK at: 6/2/2016 3:16 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

6/2/2016 3:16 PM	Rate (0)
DineshK Bronze Member Joined: 1/24/2013 Last visit: 7/19/2022 Posts: 226 Rating: (42)	Hi all Please find the screenshot, during revision of document while release the same to make as pdf the error populate as release monitoring. Thanks Dinesh K Attachment Release monitoring.JPG (515 Downloads)
	Last edited by: DINESH K J at: 6/2/2016 3:17:14 PM
Suggestion To thank Quote Answer

6/3/2016 11:11 AM	Rate (1)
DineshK Bronze Member Joined: 1/24/2013 Last visit: 7/19/2022 Posts: 226 Rating: (42)	Hi all Change revision settings in Project properties resolved the problem. Thanks Dinesh K Attachment Answer.JPG (539 Downloads)

Suggestion To thank Quote Answer

6/6/2016 8:53 AM	Rate (0)
SuperPippo Silver Expert Joined: 6/30/2014 Last visit: 11/14/2024 Posts: 464 Rating: (90)	Dear Dinesh, the solution you have found seems to work, but it looks like a workaround; so I'd like to suggest to rebuild the issue while running the DebugView, list the steps you have done, pass the information and log file to the Support opening a ticket. I think it would make sense to check if this is an issue for the Siemens developers team. With best regards, SuperPippo

Suggestion To thank Quote Answer

9/30/2016 3:01 PM	Rate (0)
DineshK Bronze Member Joined: 1/24/2013 Last visit: 7/19/2022 Posts: 226 Rating: (42)	Could any body please post it in GTAC to get better solution. Thanks Dinesh K

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on