Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication S7 CPU to Fm458

Created by: Kumis at: 3/1/2019 3:17 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/1/2019 3:17 AM	Rate (0)
Kumis Advanced Member Joined: 3/7/2017 Last visit: 10/2/2024 Posts: 75 Rating: (0)	Dear Expert, I have problem about communication S7 CPU to Fm458. are you have list fault about communication module? Attachment. ------------------------------------------------------------------------------------------ Split from FM458 communication with sinamic S120. Attachment Communication Fault S7 to FM458.png (564 Downloads)
	Last edited by: Jen_Moderator at: 3/1/2019 11:53:00 AM New subject after splitting
Suggestion To thank Quote Answer

3/1/2019 5:27 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. You have configured too long channel name at AT/AR connectors: 'RX_MAIN_MOLD' and 'TX_MAIN_MOLD'. There should be max 6 characters.
	Last edited by: KSN at: 3/1/2019 5:29:58 AM
Suggestion To thank Quote Answer

3/1/2019 1:47 PM	Rate (0)
Kumis Advanced Member Joined: 3/7/2017 Last visit: 10/2/2024 Posts: 75 Rating: (0)	Ok thanks so much my expert

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on