Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP51m1 led H4 (yellow) is flashing

Created by: MMenezes at: 8/3/2020 5:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/3/2020 5:39 PM	Rate (0)
MMenezes Posts: 2 Rating: (0)	Hello, I have problem in module CP51M1 (protocol TCP / IP). The led H4 (yellow) is flashing, but it shoulded be bright. Can you help me? Thanks ------------------------------------------------------------------------------------------ Split from CP51m1 v1.1.2.
MMenezes Posts: 2 Rating: (0)	Last edited by: Jen_Moderator at: 08/04/2020 08:46:07 New subject after splitting
Suggestion To thank Quote Answer

8/3/2020 6:40 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. Are you sure your data are sended/received without any time gaps? E.g. data are sended once per second or by some command?

Suggestion To thank Quote Answer

8/4/2020 12:46 AM	Rate (0)
MMenezes Posts: 2 Rating: (0)	Mr. KSN The Simatic receives data from the Iba PADU module, the Dword data type shows anormal blinking, changing the status data for no apparent reason. We beleave that problem is in the CP51M1 module, because the led H4 is flashing. The function block RCV_T is setting: CT1=D2000C.X01 CT2=D01P01 AR1='RTS101.T-50101' AR2='RTS102.T-50201' MOD=H LEN = 24 D=0 TT 16#13 DC 16#0B RST = 0 EN=1 Thanks for your support!
MMenezes Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/4/2020 8:57 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. FB RCV_T is not from standard D7-SYS libraries. If this FB is from ibaAG, may be you should contact their support.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on