Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

AI card configuration in ET panel(IM153) profibus communication with TDC system

Created by: Harry55 at: 2/12/2021 2:17 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

2/12/2021 2:17 PM	Rate (0)
Harry55 Experienced Member Joined: 6/2/2020 Last visit: 8/23/2024 Posts: 215 Rating: (0)	Dear All, I want to know how to configure hew AI card in ET panel which is connected through profivus network in TDC system(CFC logic). I just want in detail all process. It is urgent, please help.

Suggestion To thank Quote Answer

2/12/2021 7:59 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. Which CP do you use, CP50M0 or CP50M1?

Suggestion To thank Quote Answer

2/16/2021 4:07 PM	Rate (0)
Harry55 Experienced Member Joined: 6/2/2020 Last visit: 8/23/2024 Posts: 215 Rating: (0)	KSN Hello. Which CP do you use, CP50M0 or CP50M1? Dear Sir, We are using CP50M1, CP51M1 & CP52M0

Suggestion To thank Quote Answer

2/17/2021 5:58 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. For CP50M1 in HWConfig add required AI card into ET station, configure this card. In CFC add the respective number (number of AI inputs): 1. If you use CRV_P add DRD_I FB's. At CRV_P change NBY input to the required number of bytes. 2.If you use CRV add virtual connections of type Integer or Word.

Suggestion To thank Quote Answer

2/17/2021 2:30 PM	Rate (0)
Harry55 Experienced Member Joined: 6/2/2020 Last visit: 8/23/2024 Posts: 215 Rating: (0)	KSN Hello. For CP50M1 in HWConfig add required AI card into ET station, configure this card. In CFC add the respective number (number of AI inputs): 1. If you use CRV_P add DRD_I FB's. At CRV_P change NBY input to the required number of bytes. 2.If you use CRV add virtual connections of type Integer or Word. SIr please describe in brief as I am beginner

Suggestion To thank Quote Answer

2/17/2021 2:38 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Ok. Upload your TDC-program here, I will look it.

Suggestion To thank Quote Answer

2/17/2021 3:35 PM	Rate (0)
Harry55 Experienced Member Joined: 6/2/2020 Last visit: 8/23/2024 Posts: 215 Rating: (0)	KSN Ok. Upload your TDC-program here, I will look it. Sir How to upload it. I dont know the process

Suggestion To thank Quote Answer

2/17/2021 5:37 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	I mean add archive of your project as an attachment to the post.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on