Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM458 stop

Created by: cohiba1966 at: 8/7/2012 7:28 AM (18 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

19 Entries

Entries per page: 10 | all

8/7/2012 7:28 AM	Rate (0)
cohiba1966 Posts: 21 Rating: (0)	My FM458 stop suddently and S7 400 CPU is all right. It is an online project. Who can tell me which kind of reason can cause FM458 stop? Think you!
cohiba1966 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/7/2012 7:43 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	cohiba1966 My FM458 stop suddently and S7 400 CPU is all right. It is an online project. Who can tell me which kind of reason can cause FM458 stop? Think you! Hello. First connect to FM458 (better via DUST1 interface), go to the CFC-menu 'CPU-Module Information' and copy from both tabs the diagnostic information. This can help to understand the problem of stop.

Suggestion To thank Quote Answer

8/7/2012 7:50 AM	Rate (0)
cohiba1966 Posts: 21 Rating: (0)	There is no reason or code for stop in diagnostic information.
cohiba1966 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/7/2012 8:13 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Could you post diagnostics here? What do you see in Module Information of FM, called from Simatic manger? Have you activated checkbox 'Signal cause of STOP' in HWConfig-Properties of FM458-Diagnostic/Clock tab?

Suggestion To thank Quote Answer

8/9/2012 2:02 PM	Rate (0)
cohiba1966 Posts: 21 Rating: (0)	KSN Could you post diagnostics here? What do you see in Module Information of FM, called from Simatic manger? Have you activated checkbox 'Signal cause of STOP' in HWConfig-Properties of FM458-Diagnostic/Clock tab? I find the message' Event ID 16# 4301 Mode transition from STOP to STARTUP STOP due to: STOP caused by PG stop operation or by SFB 20 "STOP" '. What is SFB20 stop ?
cohiba1966 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/10/2012 5:44 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	Hello. SFB20 -Changing a Remote Device to the STOP State. Here ismanual.

Suggestion To thank Quote Answer

8/15/2012 8:39 AM	Rate (0)
cohiba1966 Posts: 21 Rating: (0)	I read the manual it seem that SFB20 can not cause FM458 stop. Is there any other reason for the stop of FM458-1DP? the attachment is the message of FM458-1DP. Thanks. Attachment FM458 Diagnose.zip (405 Downloads)
cohiba1966 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/15/2012 10:58 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	The main possible reason for FM458 STOP, that I could see in you diagnostic are events 48, 53 and 58. "User program canceled (stop due to system error) and "H" flashes on the display". manual Remedy: Call-up the module information in the CFC and read-out the exception buffer. H - fatal system error. What is the status of FM LEDs? Go to the CFC-menu 'CPU-Module Information' and copy from both tabs (Error fields and Exception buffer) the diagnostic information.

Suggestion To thank Quote Answer

8/16/2012 10:20 AM	Rate (0)
cohiba1966 Posts: 21 Rating: (0)	Only UF lamp flash. That is perhaps there is USF block in CFC. USF block is written with code 16#8000 which is used in software protection. Is that the reason?
cohiba1966 Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

8/16/2012 10:38 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/17/2024 Posts: 2211 Rating: (280)	cohiba1966 Only UF lamp flash. That is perhaps there is USF block in CFC. USF block is written with code 16#8000 which is used in software protection. Is that the reason? Standard USF-FB has no software protection. It could not be the reason of FM stop. Post here diagnostics fromCFC-menu 'CPU-Module Information' from both tabs (Error fields and Exception buffer).

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on