Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-400 H system

Created by: muneeb at: 4/2/2006 8:08 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

4/2/2006 8:08 AM	Rate (0)
muneeb Experienced Member Joined: 1/17/2006 Last visit: 2/7/2022 Posts: 171 Rating: (0)	Dear reader.. cananyone give me some information about how to configure hardware of an H system, full description ofFAULT andSTATUS Leds on cpus and power supplies? i will be thankful to him.

Suggestion To thank Quote Answer

4/3/2006 11:56 AM	Rate (1)
Morten Bronze Member Joined: 9/27/2005 Last visit: 4/26/2024 Posts: 203 Rating: (32)	Hallo muneeb, don`t you find the necessary information in the following documentation? http://support.automation.siemens.com/WW/view/de/1186523/0/en Many Greetings Morten

Suggestion To thank Quote Answer

4/11/2006 10:03 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, When you have the right panel on the H-System then it is possible to use Report System Error and the necessary OB's will be generated. On the display side you have to put on the systemmessages and thats all folks.... [:o] A display can easily switched to both CPUs with two repeaters on the MPI-port, one off the Repeaters is switched on, then the display have to be on the other side of the repeaters and the power is switched after the CPU thats the Master.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on