Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Need 3D model of siemens 3WL1240-4AA47

Created by: copperhead at: 1/7/2010 11:23 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

1/7/2010 11:23 PM	Rate (0)
copperhead Posts: 2 Rating: (0)	Does anyone know where I can get a 4 pole size 2 model also 3 pole size 1 - both with vertical stabs. thanks In advance. - .step, - .sat, or- .iam format
copperhead Posts: 2 Rating: (0)	Last edited by: copperhead at: 1/7/2010 11:24 PM
Suggestion To thank Quote Answer

1/11/2010 1:37 PM	Rate (0)
DaLong Posts: 9 Rating: (1)	Hallo copperhead, look at the Link www.siemens.com/lowvoltage/configurators. There you can start the configurator 3WL. After your configuration you can download the step files.
DaLong Posts: 9 Rating: (1)
Suggestion To thank Quote Answer

1/11/2010 4:38 PM	Rate (0)
copperhead Posts: 2 Rating: (0)	Thanks But the configurator did not give me good results -the step file was empty.It could have been a version conflict -- when I tried to download the satversion the web site crashed and I could never get back to the down-load section. Even after reselting the link you provided. However since I posted this request they sent me a zip file of the exact breaker !! GO SIEMENS !!
copperhead Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/12/2010 8:30 AM	Rate (0)
DaLong Posts: 9 Rating: (1)	Ok:-) Try this. Following you can find two versions in the zip-File Version 1 = fixed-mounted-versions Version 2 = withdrawable-versions Have fun. Attachment 3WL1240-4AA47.zip (785 Downloads)
DaLong Posts: 9 Rating: (1)
Suggestion To thank Quote Answer

2/22/2010 7:13 AM	Rate (0)
jANEJACKY Posts: 2 Rating: (0)	DaLong Ok:-) Try this. Following you can find two versions in the zip-File Version 1 = fixed-mounted-versions Version 2 = withdrawable-versions Have fun. hi, DaLong Good Where did you get this file? Can we? Thanks!
jANEJACKY Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on