Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinAC Target with Matlab/Simulink

Created by: nowwon at: 11/24/2013 6:37 PM (6 Replies)

Rating (2)

Thanks 1

7 Entries

11/24/2013 6:37 PM	Rate (0)
nowwon Posts: 6 Rating: (0)	hi, does someone tried this example aplication?(https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&objid=56969417&nodeid4=20229695&caller=view&switchLang;56969417;2.x=34&switchLang;56969417;2.y=4&lang=de&siteid=cseus&aktprim=4&objaction=csopen&extranet=standard&viewreg=WW) I wanted make own application and i have trouble with compiling code from matlab. i have installed matlab 2013a with necessary plugins ( MATLAB Coder V2.3, Simulink Coder V8.3, Embedded Coder V6.3), WinAC ODK V4.2 SP1, WinAC Target ( installed m-file in matlab), Microsoft Visual Studio 2010 Professional Win7 32bit like in manual. https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&objid=56969417&nodeid4=20229695&caller=view&switchLang;56969417;2.x=34&switchLang;56969417;2.y=4&lang=de&siteid=cseus&aktprim=4&objaction=csopen&extranet=standard&viewreg=WW. I made my own model in Simulink similary like example from Siemens, and i can't made build model by WinAC target (.dll). Building by WinAC Target start good and crash with the one file: ert_main.cpp(112) : error C3861: 'rtERTExtModeParseArgs': identifier not found. Full crash code in file Matlab error. What i can do in this situation? If anyone can help me I would be very grateful Attachment matlab_error.zip (510 Downloads)
nowwon Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

11/25/2013 8:29 AM	Rate (1)
taxflor Silver Member Joined: 1/26/2011 Last visit: 8/11/2022 Posts: 243 Rating: (67)	Hello nowwon, first of all i guess you are using the version V1.2? Do you have also a further version installed and can test it with the version of 2012 for example? I downloaded the WinAC Target too and i have no problems.Not with the"PID" test model andalso no problems with a very simplemodel created by myself.BUT i have version 2012a. Maybe, if you don't have a further version of matlab, you can upload your test model here and i can do a short test for you with mymatlab version What about this idea? regards, bigfoot

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users nowwon

11/26/2013 3:19 PM	Rate (1)
taxflor Silver Member Joined: 1/26/2011 Last visit: 8/11/2022 Posts: 243 Rating: (67)	Hello again, another idea... it seems that you are using the external mode functionality. have you ever tried to generate code with the WinAC Target without the external mode? Maybe it is a problem caused by the external mode... best regards, bigfoot

Suggestion To thank Quote Answer

11/27/2013 4:00 PM	Rate (0)
taxflor Silver Member Joined: 1/26/2011 Last visit: 8/11/2022 Posts: 243 Rating: (67)	Hello nowwon, i guess you have solved your problem?! Thanks a lot for a the stars Can you tell me what your problem was? I am very interested in this topic. best regards, bigfoot

Suggestion To thank Quote Answer

11/27/2013 9:47 PM	Rate (0)
nowwon Posts: 6 Rating: (0)	hi, I checked your "another idea...": Simulink model without external mode and model built successful. I think that my Matlab version or any software (example C++ library or...) areincompatible. Thanks very much for your time. best regards, nowwon.
nowwon Posts: 6 Rating: (0)	Last edited by: nowwon at: 12/1/2013 9:08 PM
Suggestion To thank Quote Answer

1/23/2014 10:27 AM	Rate (0)
GrasserF Posts: 340 Rating: (6)	new question is splittet to WinRTx CPU 416 shift to S7400 controller
GrasserF Posts: 340 Rating: (6)
Suggestion To thank Quote Answer

5/12/2014 4:06 PM	Rate (0)
taxflor Silver Member Joined: 1/26/2011 Last visit: 8/11/2022 Posts: 243 Rating: (67)	Hello again, after I received my new version of MatlabI also got the error like in the first message from nowwon. After a little research I found out that the used name of the winac target is renamed in this new mathworks software version. i hope the problem will be fixed in the next version of winac target. just for your information. best regards, bigfoot

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on