Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ct pt

Created by: Jason85 at: 5/30/2014 9:34 AM (3 Replies)

Rating (2)

Thanks 1

4 Entries

5/30/2014 9:34 AM
Jason85 Posts: 39 Rating: (9)	Dear how the CT and PT is connected in the circuit during testing of transformer?
Jason85 Posts: 39 Rating: (9)
Suggestion

5/30/2014 9:57 AM	Rate (0)
Madhava Silver Member Joined: 11/26/2011 Last visit: 6/29/2023 Posts: 508 Rating: (23)	W@lverine Dear how the CT and PT is connected in the circuit during testing of transformer? Your question is not clear. What kind of transformer you are having? What is your existing circuit diagram ? What are the tests you are going to do ? Can you give the above details..

Suggestion To thank

5/30/2014 10:03 AM	Rate (0)
N. Vijay Silver Member Joined: 3/17/2013 Last visit: 8/25/2024 Posts: 481 Rating: (43)	Hi Typical diagaram will be as attached. regards, Vijay Attachment Ct_PT wring dia.JPG (200 Downloads)

Suggestion To thank

5/30/2014 11:17 AM	Rate (2)
Er.digu Posts: 17 Rating: (4)	W@lverine Dear how the CT and PT is connected in the circuit during testing of transformer? Generaly CT and PT are used for mesuring current and voltage respectively. And as per your question CT and PT uesed for only measurement purpose only so after testing easily calculate other value which are not directly measure using ant meter.
Er.digu Posts: 17 Rating: (4)
Suggestion To thank
This contribution was helpful to 1 thankful Users Jason85

|

Share this page:

Share this page on...

Follow us on