Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Need help with WinAC RTX 2010

Created by: Andrey_Afonin at: 5/7/2014 4:10 PM (18 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

19 Entries

Entries per page: 10 | all

5/9/2014 10:36 AM	Rate (0)
Andrey_Afonin Experienced Member Joined: 8/30/2009 Last visit: 1/20/2021 Posts: 41 Rating: (0)	WainAC is running. It is able to communicate with WinCCFlex - for the test I transfer the Clock Memory byte. And I did not test it on another PC to operate with distributed IO.

Suggestion To thank Quote Answer

5/9/2014 11:30 AM	Rate (0)
smoky Experienced Member Joined: 8/15/2011 Last visit: 9/9/2024 Posts: 145 Rating: (13)	just for test... can you load simple PN station without ET200M via IF1 like this? Attachment D:\FORUM_DOWNLOADS\WinAC_PN.JPG (421 Downloads)

Suggestion To thank Quote Answer

5/9/2014 4:23 PM	Rate (0)
Andrey_Afonin Experienced Member Joined: 8/30/2009 Last visit: 1/20/2021 Posts: 41 Rating: (0)	I've already done this. The result was red LED BUSF1 constantly lit, even in case if there was a phisical link between IF1 and other interface (ET200M or my laptop or Scalance). When downloading a configuration with ET200M, BUSF1 blinks and EXTF lights constantly.

Suggestion To thank Quote Answer

5/9/2014 4:32 PM	Rate (0)
smoky Experienced Member Joined: 8/15/2011 Last visit: 9/9/2024 Posts: 145 Rating: (13)	sorry for this question: load via IF1 was OK?

Suggestion To thank Quote Answer

5/9/2014 10:58 PM	Rate (0)
Andrey_Afonin Experienced Member Joined: 8/30/2009 Last visit: 1/20/2021 Posts: 41 Rating: (0)	No, load via IF1 was not possible in any case: communication partner not responding (or something like this). All configurations were downloaded via another 82574 fitted to IEGeneral/Slot1.

Suggestion To thank Quote Answer

5/12/2014 10:24 AM	Rate (0)
smoky Experienced Member Joined: 8/15/2011 Last visit: 9/9/2024 Posts: 145 Rating: (13)	82574L as IEGeneral slot1 andas IEGeneralslot IF1...maybenot good... Imean: load simple station via IF1 without IEGeneral in slot1... In Station Configurator - WinAC slot 2. - 82574L slot IF1 (WinAC).

Suggestion To thank Quote Answer

5/12/2014 12:19 PM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (173)	Is it possible to add an external CP or NIC via PCIe slot- so you might check whether another NIC would work?
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

5/12/2014 2:05 PM	Rate (0)
Andrey_Afonin Experienced Member Joined: 8/30/2009 Last visit: 1/20/2021 Posts: 41 Rating: (0)	smoky Tried the configuration without ET200M and IEGeneral/Slot1 The link is down. Step7 can not connect to WinAC to download the configuration. LEDs on both ethernet cards blink, but connection can not be established. TomDeWou Unfortunately, the only possible Ethernet extension is already fitted - the second I82574L.
	Last edited by: Andrey_Afonin at: 5/12/2014 2:07 PM
Suggestion To thank Quote Answer

5/12/2014 2:50 PM	Rate (0)
TomDeWou Platinum Expert Joined: 11/15/2006 Last visit: 5/7/2021 Posts: 1319 Rating: (173)	For me this sounds like a problem with the buildin NICs. I guess if using another system it works.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on