3/25/2024 1:04 AM | |
Joined: 10/7/2005 Last visit: 10/31/2024 Posts: 3025 Rating: (1055)
|
Hi plcspace don't have Step5 handy, but attached Step 7 logic example will functionally do in LAD what your S5 STL logic does and you are hopefully able to program it in Step 5. UPDATE: Bad news, Step5 does not allow a conditional call of the "Move" instruction (aka L/T instruction in Step5) so the above Step7 logic can not be directly translated into Step5. All up, simplest way is to stick with STL. |
Last edited by: fritz at: 03/25/2024 05:14:21Added UPDATE Cheers |
|
This contribution was helpful to2 thankful Users |
4/1/2024 5:10 AM | |
Joined: 3/6/2020 Last visit: 10/28/2024 Posts: 37 Rating: (0) |
I know how to do it in Step7.The question is how to make a jump in STEP5 in the LAD language. |
Follow us on