How does WinCC V14 support Graph Diagnostics / Pro Agent?
Created by: JCB1138 at: 7/26/2017 10:49 AM (1 Replies)
Rating 
Thanks 0
2 Entries
| 7/26/2017 10:49 AM | |
Joined: 5/1/2015 Last visit: 7/17/2024 Posts: 2 Rating:
|
Does anyone know if and how WinCC V14 will support Graph Diagnostics / Pro Agent. We have a project 300 PLC, S7 5.5 SP4 with a TP1200 Comfort Panel. Migrating the HMI from MP277 WinCC 2008 SP3. Pro Agent function is lost? Any help please, greatly appreciated. ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 7/27/2017 12:19:18 PMNew subject after splitting |
|
| 7/27/2017 2:34 PM | |
Joined: 8/3/2009 Last visit: 10/31/2024 Posts: 14079 Rating:
|
Hello JCB In TIA Portal there is no functionality for the "classic" PDiag/ProAgent!! The new Option in TIA portal V14 "ProDiag" is a similar Solution but only for S7-1500 PLC and V14 with >= firmware 2.0. And its an option on plc and HMI. Here are additional Information: https://support.industry.siemens.com/cs/de/en/view/109740151 Bye Murof |
|
If this Information really helps, you could use the Rate function |
|
Follow us on