HELLO. I need help . where can i find example programming FB (functional block)Control abb DCS880 for TIA PORTAL. I did find example for only ACS880.  BUT I need DCS880. 

OR DCS880 AND ACS880 IS SAME THINGS FOR PROGRAMMING FB (functional block) CONTROL drive ABB FOR TIA PORTAL???

FB500 for ACS only ???

my english is not very well

Hello Vitalij;

ixo65 is right, the best place to look for this type of infromation is the ABB site.

For example, in this page, you will find documentation on the FENA-21 Ethernet adapter for ABB drives (ACS880 and DCS880, among others) using Profinet, with download links of the ABB library for TIA Portal and Simatic Manager and the GSDML file for the FENA-21 adapter Profinet configuration.

https://new.abb.com/drives/connectivity/fieldbus-connectivity/profinet/fena-21

Hope this helps,

Daniel Chartier

Sorry, but this is a forum for Siemens products.

If you want information for ABB drives then contact ABB.

Hi VitalijJob!

Try to watch the video "https://www.youtube.com/watch?v=gsqgakkiHEo".

It is in Portuguese but I think you can understand by the image.
It uses DPWR_DAT and DPRD_DAT.
The ABB drive uses a FENA-11 in ABB drive.

The comunication works for DCS880 or ACS 880.
It works for me using CPU 1515F-2PN and DCS880/FENA-21 (Porfinet).
Remember to set the Profinet name in both sides.

Hope this helps,

Dutra