9/26/2023 8:54 PM | |
Joined: 10/20/2010 Last visit: 8/13/2024 Posts: 2 Rating:
|
Hello everyone! I was researching how to establish PN communication with a simatic IOT2040 device, I found that in this topic: https://support.industry.siemens.com/forum/in/en/posts/profinet-integrated-with-node-red/238044/?page=0&pageSize=10
there is mention of the possibility of storing a PN value in a file.But before saving this value to a file, I wouldn't know what command or program to use to get this value, (im using the X2P1LAN port for PROFINET communication). any help? |
9/27/2023 7:21 AM | |
Joined: 4/28/2015 Last visit: 9/9/2024 Posts: 3345 Rating:
|
Hi, first of all you need the realtime image with the PN Driver at the bottom of this page. Then you have two options:
Best regards! |
Not working for IOT2050 support anymore from March 1st, 2024. |
|
Follow us on