reynaldo_lopez145

reynaldo_lopez145

I can not connect remotely with my 8.3 base module LOGO. Can anyone help me with a step by step procedure to achieve it.

I am using LSC V. 8.3

What do you mean by "remotely"?

Do you want connect  the LOGO! with a other LOGO!?

Or another PLC?

Or can't you reach the LOGO! in your home network?

Or via the Internet?

ixo65

Do you want connect  the LOGO! with a other LOGO!?

Or another PLC?

Or can't you reach the LOGO! in your home network?

Or via the Internet?

And why do you not answer to my questions?

The way you describe your problem, it sounds like you are trying to do something on the simple web server of LOGO! 8.3.

The simple web server shows you the virtual display of the LOGO! and can only see display programmed message texts. To do this, the checkmark for "Web server" must also be set when creating the message text.

The simple web server cannot display the LOGO! menu.
If you want to trigger an action with the cursor keys, the ESC key must be switched on in the virtual LOGO.

Check the link to a video from Siemens.

Programming exercise: Webserver (TDE)

reynaldo_lopez145

Sorry for the delay in contacting you

The question is: How can I switch the Scape (esc) Key on in the virtual LOGO

The virtual ESC key has a latching function.
If you click on the ESC key, it will remain pressed virtually.
You can now use the cursor keys to execute functions that you can query in the program using the cursor keys.
If you click on the ESC key again, it will be virtually released.