9/21/2010 9:01 PM | |
Joined: 9/27/2006 Last visit: 8/18/2024 Posts: 12278 Rating:
|
Hello Johannessen; Have a look at this thread, where our friend SamTheEagle was kind enough to post a few of the TI 500 manuals: /tf/WW/en/Posts/39434 For the TI 505 I/Os, I know we could use a Profibus RBC (remote base controller) to basically turn the remote rack into a Profibus slave. This way you could maintain the existing I/O by plugging it into a Profibus master; of cxourse you had to reprogram all the logic in the new master. However,I am not sure that the 500 series ever developped that functionnality. This will require a bit more investigation. Hope this helps, Daniel Chartier EDIT: CTI has now taken over the development of new CPUs, communication interfaces and, it seems, RBCs for the TI 500 series. Look at the following chat: http://2500.invisionzone.com/index.php?showtopic=53 You might possibly want to look at the offerings from CTI: http://www.controltechnology.com/ D.C. |
Last edited by: dchartier at: 9/21/2010 9:07 PM |
|
This contribution was helpful to
1 thankful Users |
9/22/2010 11:10 AM | |
Joined: 2/10/2006 Last visit: 7/15/2024 Posts: 148 Rating:
|
Hi Jeff, Attachment06200375_010.pdf (560 Downloads) |
This contribution was helpful to
1 thankful Users |
Follow us on