------------------------------------------------------------------------------------------
Split from Convert program using S5 Converting tool.

AutoGen_2655561

Dear all I convert the project from S5 to S71200 . I already converted but some blocks are in STL Language that program i converted to Ladder but when i am trying to download and run the machine but the operation can't work . i miss some calculation from the Existing S5 program because i changed to ladder can you please help me to Convert this into Ladder. The existing they are using 2 High speed counter (IW106 and IW98) you can see it in FB53 and FB54.instead of that we are using the Inbuilt high speed counter . the problem is in the conversion of STL block and the Scaling for the new PLC.I have the problem with FB52,53,54,55,56 and FB197.Can anyone please convert this FB's to Ladder. Here i Attached the PDF of the Blocks.

Please don't post twice for the same problem.

You also pst your problem in this topic:

Convert S5 program into S7 Using S5 Converting tool

Closed cause question posted twice.

The second thread with the subject Need help to convert STL to Ladder is published within the conference STEP 7 (TIA Portal).