4/15/2024 2:21 AM | |
Joined: 3/26/2024 Last visit: 7/17/2024 Posts: 4 Rating:
|
reynaldo_lopez145 I can not connect remotely with my 8.3 base module LOGO. Can anyone help me with a step by step procedure to achieve it. I am using LSC V. 8.3 ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 04/15/2024 04:10:34New subject after splitting |
|
5/13/2024 10:29 PM | |
Joined: 3/26/2024 Last visit: 7/17/2024 Posts: 4 Rating:
|
I can´t access thoe logo neither my local network and via internet |
6/4/2024 3:18 AM | |
Joined: 12/18/2014 Last visit: 9/4/2024 Posts: 33688 Rating:
|
The way you describe your problem, it sounds like you are trying to do something on the simple web server of LOGO! 8.3. The simple web server shows you the virtual display of the LOGO! and can only see display programmed message texts. To do this, the checkmark for "Web server" must also be set when creating the message text. The simple web server cannot display the LOGO! menu. Check the link to a video from Siemens. Programming exercise: Webserver (TDE) |
7/11/2024 8:09 PM | |
Joined: 3/26/2024 Last visit: 7/17/2024 Posts: 4 Rating:
|
Sorry for the delay in contacting you The question is: How can I switch the Scape (esc) Key on in the virtual LOGO |
Follow us on