12/22/2006 9:47 AM | |
Joined: 4/24/2006 Last visit: 8/14/2024 Posts: 8714 Rating:
|
Hello, Here is a link to manual: http://support.automation.siemens.com/WW/view/en/1117740 see chapter 5.19 Is measuring module in right position? Is channel 0 disabled? Do not connect 24vdcand M (48) ![]() Have you seen this faq: http://support.automation.siemens.com/WW/view/en/20780602 Merry Christmas Wizard |
Follow us on