7/31/2007 8:22 AM | |
Joined: 9/28/2005 Last visit: 8/12/2024 Posts: 2957 Rating:
|
Hello, What version of Step 7 are you using ? Only Step 7 v5.4 supports this new Y-link. Regards, |
Best regards, |
|
7/31/2007 12:04 PM | |
Joined: 9/28/2005 Last visit: 8/12/2024 Posts: 2957 Rating:
|
Hello, I think PCS7 isn't important here if you don't use it. I can't tell if it is compatibility problem, but you can try to look here: https://support.automation.siemens.com/WW/skm/frameset.asp?url=%2FWW%2Fllisapi%2Edll%2F23372259%3Ffunc%3Dll%26objId%3D23372259%26objaction%3Dcsopen%26siteid%3Dcseus%26skm%3D1%26lang%3Den&Query=y%2Dlink&SearchArea=akt&id=23372259&F11Marker=true&siteid=cseus&query2=&modelled=&lang=en I have used Y-link on the latest S7-417H and had no problems. Please, tell me what kind of slaves do you have? If it isn't Siemens, try to look at GSD compatibility with this new Y-link. Regards, |
Best regards, |
|
Follow us on