Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connection to simosim in scout TIA

Created by: TangZh at: 11/15/2022 4:07 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

11/15/2022 4:07 PM	Rate (0)
TangZh Posts: 21 Rating: (0)	I cannot connect to simosim(D435-2DP/PN) in SCOUT TIA V5.4.3.0 The version of SIMOSIM is consistent with SCOUT TIA as V5.4. As shown in pictures, when I set the PG/PC interface and run SIMOSIM, whether I go online in TIA or in SCOUT TIA, there exits connection error. Please help! Thanks Attachment 8.png (884 Downloads)
TangZh Posts: 21 Rating: (0)	Last edited by: TangZh at: 11/15/2022 16:08:04
Suggestion To thank Quote Answer

11/15/2022 4:16 PM	Rate (0)
TangZh Posts: 21 Rating: (0)	All my TCP/IP settings are here. I make an effort to solve the error, but I don't know where the problem is. Please help. TangZh I cannot connect to simosim(D435-2DP/PN) in SCOUT TIA V5.4.3.0 The version of SIMOSIM is consistent with SCOUT TIA as V5.4. As shown in pictures, when I set the PG/PC interface and run SIMOSIM, whether I go online in TIA or in SCOUT TIA, there exits connection error. Please help! Thanks Attachment Desktop.zip (827 Downloads)
TangZh Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

11/16/2022 2:34 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/14/2026 Posts: 6066 Rating: (828)	hello it seems that settings are correct. You can try to get the address automatically under network settings. (screenshot attached file). In my case, the very first time you go online, the effect is that the connection is not established (message as shown). Simply press the online button again. Attachment Network_SIMOSIM.pdf (813 Downloads)
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users TangZh

|

Share this page:

Share this page on...

Follow us on