Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Need a wiring diagram for a SIEMENS SIMODRIVE 610 system with a 1FT5 series servo motor.

Created by: medo1998 at: 10/2/2023 1:10 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

10/2/2023 1:10 PM	Rate (0)
medo1998 Posts: 35 Rating: (0)	I would like to request a wiring diagram for a SIEMENS SIMODRIVE 610 system with a 1FT5 series servo motor. Attachment 7075473-03.1692641682__.jpg (495 Downloads)
medo1998 Posts: 35 Rating: (0)	Last edited by: Jen_Moderator at: 10/10/2023 04:16:07 Headline optimized.
Suggestion To thank Quote Answer

10/2/2023 10:32 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 9/12/2025 Posts: 4449 Rating: (400)	I would like you give me 5 star rating or a "Thanks" see attached manaul, all you need inside Attachment 591_6SC61_Instruction_Manual.pdf (589 Downloads)
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users medo1998

10/3/2023 10:26 AM	Rate (0)
medo1998 Posts: 35 Rating: (0)	Can one use a Simodrive 610 with a single 1FT5 servomotor? If yes, how many control and power cards are required? Is there a specific wiring diagram?
medo1998 Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

10/3/2023 11:09 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 9/12/2025 Posts: 4449 Rating: (400)	Yes, Please check the manual I load to you medo1998 Can one use a Simodrive 610 with a single 1FT5 servomotor? If yes, how many control and power cards are required? Is there a specific wiring diagram?
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

10/29/2023 6:14 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 9/12/2025 Posts: 4449 Rating: (400)	Can you response when people answer your questions medo1998 Can one use a Simodrive 610 with a single 1FT5 servomotor? If yes, how many control and power cards are required? Is there a specific wiring diagram?
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on