Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How can I reduce width of the block?

Created by: siarhei_kashchuk at: 5/16/2025 10:33 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/16/2025 10:33 AM	Rate (0)
siarhei_kashchuk Joined: 12/5/2024 Last visit: 9/17/2025 Posts: 3 Rating: (0)	I use TIA Portal 14.1. Some of LAD blocks too wide while others are OK. How can I solve it? Attachment Width.png (128 Downloads)

Suggestion To thank Quote Answer

5/16/2025 1:13 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 1/16/2026 Posts: 4848 Rating: (512)	siarhei_kashchuk I use TIA Portal 14.1. Some of LAD blocks too wide while others are OK. How can I solve it?

Suggestion To thank Quote Answer

5/16/2025 2:07 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 1/16/2026 Posts: 16376 Rating: (2522)	If you see the Compact / Wide radio buttons right above the circled portion, you can toggle to Compact and I think you will appreciate the change. Hati siarhei_kashchuk
	science guy
Suggestion To thank Quote Answer

5/16/2025 2:09 PM	Rate (0)
siarhei_kashchuk Joined: 12/5/2024 Last visit: 9/17/2025 Posts: 3 Rating: (0)	Thank you! You gave me a clear idea about this problem. But why does this setting affect PID_3Step but less on Valve_FB? How can I make PID_3Step narrower?
	Last edited by: siarhei_kashchuk at: 05/16/2025 14:10:08
Suggestion To thank Quote Answer

5/16/2025 2:30 PM	Rate (0)
0_Einstein Grandmaster-Expert Joined: 7/7/2010 Last visit: 1/16/2026 Posts: 16376 Rating: (2522)	In the lower right of the working pane is a small slider that can fix that for you. Default is 100%. I recommend 75 - 85% as a starting point. siarhei_kashchuk Thank you! You gave me a clear idea about this problem. But why does this setting affect PID_3Step but less on Valve_FB? How can I make PID_3Step narrower?
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on