Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Screen opening

Created by: zafarltc at: 7/21/2007 10:18 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/21/2007 10:18 AM	Rate (0)
zafarltc Posts: 14 Rating: (0)	hello sir imade my project in pro tool i want when i work in my any menu any screen in side then no message appear on screen From PLC Bit Side because may be i am setting on some thing on my setting Page I want When I Go In Running ScreenThen Thease message Appears on screen i want in one page my all screen apears if this page is not open then no screen open and my working screen not distrub please help me i am very thanks full to you
zafarltc Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

7/21/2007 1:32 PM	Rate (0)
Nemo Posts: 3149 Rating: (172)	Hi, I fear I did not understand what is your problem in detail: which protool version, which panel, which S7 are you using? How is your panel connected to your S7, mpi, ppi,...? Which cable are you using? Is any value from your S7 shown on your panel, or is there no connection form panel to S7? nemo
Nemo Posts: 3149 Rating: (172)
Suggestion To thank Quote Answer

7/25/2007 9:35 AM	Rate (0)
The Brain Posts: 1611 Rating: (121)	Hi, you can try following -> see attachment. This should be work. But system message you could not disable. Attachment Message_01.GIF (459 Downloads)
The Brain Posts: 1611 Rating: (121)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on