Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Communication Error between field and SIMODRIVE Units and occured F151 and 52 fault message

Created by: Thomarzali at: 10/11/2007 12:39 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/11/2007 12:39 PM	Rate (0)
Thomarzali Posts: 8 Rating: (0)	Dear all, We have croos cut saw application and there are using Siemens SIMOTION P Control System with SIMODRIVE drivers. Now, we have problem and the driver show us F151 and F52 fault message. That means, there is a problem with PROFIBUS communication between field and SIMODRIVE units.We checked everywhere and everything and we did reboot our system and we couldn't find problem and any solution. In additional, we tried to adjust home position manually by hand. But, the result same and problem is continued. Could you tell me please how we can solve this problem and what we will de ? We have to find solution immediately , otherwise, our production line will STOP according to this problem? I'm looking forward your solution suggestion and reply as soon. Regards. Emir
Thomarzali Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/17/2007 3:58 PM	Rate (0)
Manfred Posts: 156 Rating: (17)	Dear Emir, did you have already contact with the Simotion Hotline +49 (0)180 5050 222 ? Regards Manfred
Manfred Posts: 156 Rating: (17)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on