I was browsing recently and saw Dean Nordfleets reply to message 70 (2001-10-26) that APT1.9A runs under W2000 with a CP1613 card.

Is it only 1.9A or can we use our existing 1.9 with W2000 and the 1613 card ? Has anyone done this ?

Yes, APT 1.9A is the only version of APT that will work with the CP1613 card, and this card is only supported on Windows NT or 2000.

Regards,

Dean Norfleet

It is possible to network APT versions 1.9 and 1.9a over ethernet TCP/IP using your standard NIC and the TCP/IP stack included in W2K and XP. The networking software used, APTnet, also takes less conventional memory.

If you have additional questions, Call Alan at 865-584-0440 x 450.