Hello,

I've a problem uploading a PLC CPU 1513F, i need WAGO gsd file:

"gsdml-v2.32-wago-series750_753-20180313.xml" with the same release date 20180313, can you help me with this file? Is there another way to upload the software blocks if i don't have the mention file?

Note: i have high and lower versions of gsd files from WAGO, but the mentioned release date, i don't have.

Appreciate your help,

Ramy

R.Fakir

Hello,

I've a problem uploading a PLC CPU 1513F, i need WAGO gsd file:

"gsdml-v2.32-wago-series750_753-20180313.xml" with the same release date 20180313, can you help me with this file? Is there another way to upload the software blocks if i don't have the mention file?

Note: i have high and lower versions of gsd files from WAGO, but the mentioned release date, i don't have.

Appreciate your help,

 Contact Wago and reguest that specific GSD.

R.Fakir

Hello,

I've a problem uploading a PLC CPU 1513F, i need WAGO gsd file:

"gsdml-v2.32-wago-series750_753-20180313.xml" with the same release date 20180313, can you help me with this file? Is there another way to upload the software blocks if i don't have the mention file?

Note: i have high and lower versions of gsd files from WAGO, but the mentioned release date, i don't have.

Appreciate your help,

Ramy

 Hello,it turned out to be found "gsdml-v2.32-wago-series750_753-20180313.xml"? If yes,can you give it?

I have made a request toWAGO and am waiting for a response. My problem with this GSDML is the following:

We use WAGO I/O system, which works with the S7 1516F-3 PN/DP PLC.

I am currently trying to download a program from a PLC via TIA Portal v16.

When downloading, TIA Portal asked me to provide a GSDML file called "gsdml-v2.32-wago-series750-753-20180313.xml ".

I downloaded and installed GSDML-V2.32-WAGO-series750-753-20240415 from the officialWAGOwebsite, but the error message remains.

I tried to rename the file to the correct one and the download continued.

However, a new error message appeared for the installed module:

"The module type could not be determined4FDIiPar, {UINT8, UINT8[4]} I/O offline."

I think I need the version of the GSDML file for this date.

Since the version for both files is 2.32, you can always try renaming the downloaded file from *-20240415.xml to *-20180313.xml and try that.  I suspect it will work well enough.

vidok

I have made a request toWAGO and am waiting for a response. My problem with this GSDML is the following:

We use WAGO I/O system, which works with the S7 1516F-3 PN/DP PLC.

I am currently trying to download a program from a PLC via TIA Portal v16.

When downloading, TIA Portal asked me to provide a GSDML file called "gsdml-v2.32-wago-series750-753-20180313.xml ".

I downloaded and installed GSDML-V2.32-WAGO-series750-753-20240415 from the officialWAGOwebsite, but the error message remains.

I tried to rename the file to the correct one and the download continued.

However, a new error message appeared for the installed module:

"The module type could not be determined4FDIiPar, {UINT8, UINT8[4]} I/O offline."

I think I need the version of the GSDML file for this date.

0_Einstein

Since the version for both files is 2.32, you can always try renaming the downloaded file from *-20240415.xml to *-20180313.xml and try that.  I suspect it will work well enough.

vidok

I have made a request toWAGO and am waiting for a response. My problem with this GSDML is the following:

We use WAGO I/O system, which works with the S7 1516F-3 PN/DP PLC.

I am currently trying to download a program from a PLC via TIA Portal v16.

When downloading, TIA Portal asked me to provide a GSDML file called "gsdml-v2.32-wago-series750-753-20180313.xml ".

I downloaded and installed GSDML-V2.32-WAGO-series750-753-20240415 from the officialWAGOwebsite, but the error message remains.

I tried to rename the file to the correct one and the download continued.

However, a new error message appeared for the installed module:

"The module type could not be determined4FDIiPar, {UINT8, UINT8[4]} I/O offline."

I think I need the version of the GSDML file for this date.

 

I have already tried to rename the file, but unfortunately it did not help. The WAGO support team responded to me and sent me the required file. And then I already renamed it to the right one "...20180315.xml" -> "...20180313.xml"