Dear All,

Where can i dowload GSD file profinet inverter FC 360.

please help me.

Thank

Linh

Hi pvlinh64vn,

in the documentation of Danfass FC 360 stand following:

Manual

 Download the GSD €le for VLT® AutomationDrive FC 360 from drives.danfoss.com/services/software-downloads/.

 I attached the manual for further information.

Best regards,

Noodles

8Noodles

Hi pvlinh64vn,

in the documentation of Danfass FC 360 stand following:

Manual

 Download the GSD €le for VLT® AutomationDrive FC 360 from drives.danfoss.com/services/software-downloads/.

 I attached the manual for further information.

Best regards,

Noodles

 Thank you so much.

i already find it.

Best regard

Linh

Can you Share the GSD File or link to download the same

Thanks in Advance

Electromation

Can you Share the GSD File or link to download the same

Thanks in Advance

 Have you take a look at the PDF filte, that the user 8Noodles has attached?

Or is ist to much work?

Hello, 

Can you please share the GSD file?

I cannot find it.

Much appreciated!

Hello Siksek;

The following link point to the Search page from Danfoss, you should be able to find your gsd files here:

https://www.danfoss.com/en/search/?query=fc360%20gsd%20file&filter=documentationLanguage%3Aen_en%2CdocumentationArchived%3Afalse&page=2

Hope this helps,

Daniel Chartier 

Dear Daniel, 

I already checked the whole Danfoss website and several other websites and I cannot find the GSD file for the FC 360 Profinet,

Did you manage to find it?

Best regards,

GSD = Profibus
GSDML = ProfiNet

And a ProfiNet GSDML filefor FC360 in not on the Support site of Danfoss, only for FC361.

Hello Siksek;

I agree with ixo65 (and with your own original findings), I cannot locate the GSDML file for FC360 (for Profinet) on their site either.

However, this document describes the configuration steps of a FC360 drive with a Profinet control cassette, and points to the FC360 Profinet configuration  file as GSDML-V2.3-Danfoss-FC360-20151212.xml (see page 7). Logically, this file must exist, at least in Danfoss Support archives.

http://files.danfoss.com/download/Drives/MG06G102.pdf

At this point, it seems that you  should contact Danfoss support and request that the GSDML file be forwarded to you.

Hope this helps,

Daniel Chartier

Hello y_y_y_Y-;

Please read the earlier replies in this thread.

It seems you will need to contact Danforr support to get an answer.

Hope this helps,

Daniel Chartier

Have you not read the post from dchartier?

Contact Danfoss ...

Hi,

did you already read the answers on the first page of this topic? Did you follow the suggestions there?

Please follow the recommendation from the user dchartier:

dchartier

Hello Siksek;

I agree with ixo65 (and with your own original findings), I cannot locate the GSDML file for FC360 (for Profinet) on their site either.

However, this document describes the configuration steps of a FC360 drive with a Profinet control cassette, and points to the FC360 Profinet configuration  file as GSDML-V2.3-Danfoss-FC360-20151212.xml (see page 7). Logically, this file must exist, at least in Danfoss Support archives.

http://files.danfoss.com/download/Drives/MG06G102.pdf

At this point, it seems that youshould contact Danfoss support and request that the GSDML file be forwarded to you.

Hope this helps,

Daniel Chartier

Attachment

Danfoss FC 360 Profinet setup.jpg(77 Downloads)

--> wait till Danfoss will answer you - I think you have no other choice.

Best regards,
Noodles

Hi Ravi,

did you read the post from dchartier, which I quoted? Did you try it out?

Can you share to me about gsdml-v2.3-danfoss-fc360-20151212.xml  ，i need this file upload program , my email: [snip]

Thank you very much ！！ 

Hello, please share GSD for Danfoss FC360, i check all links on official site and google, but dont find this, thanks.