Hello,

Having the following components;

- S7-1214 DC/DC/DC

- LOGO 8.3

I know that it's possible to do something with Network Outputs and Network Inputs between 2 LOGO'S

But, is it also possible to create something between a S7 and a LOGO.

 I want to create that and (Network) output from the S7 switch the Network input on the LOGO

At the moment there is a network available so can use this to put the S7 and the LOGO in the same subnet.

anybody has some ideas, tips or example how (when possible) to create this.

looking forward for some reply

regards

Take a look at this Siemens application example.

LOGO! - S7 Connection with LOGO! Client and S7-1200/1500 Server

Thanks for the quick response.

will have a look at it

That works.

I made this for years before the Siemens application example were online.

Edit:

Take also a look at my topic in the German part of the forum:

Beispiel: Einrichten einer Kommunikation zwischen LOGO! 0BA8 und S7-1200

Hi,

Because this is pretty New for me, is it possible that you give me a short example on how to program these in the S7 and Logo?

The only thing i'll need is that the Q1 in the is LOGO switching when the Q0.0 switched on the S7.

That's it

Hopefully you can arrange something for me 

Many thanks in advanced.

Yes indeed thats the thing i'll want.

Using a local network with network switches on both sides.

I saw something in the i/o settings in the logo but don't know to program it.

I hope that somebody can help me out with some kind of an example of how to program iit in both s7 and Logo.

I have linked to you the example and my topic in the German speaking part of the forum.

Is this not enough?

Tell me your problems ...

Sorry, but the problem is that i don't where to begin.

I'am using v16 so can not open the project.

is it possible for you to make a small program using an s7 and a logo?