Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Serial Redundant Link / Port for DCS system

Created by: Gan at: 9/13/2010 4:03 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/13/2010 4:03 AM	Rate (0)
Gan Posts: 5 Rating: (0)	Anyone done this before?
Gan Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

9/13/2010 12:01 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, I don't do it before, but I think that you can use two serial ports, both as Modbus slave.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

9/13/2010 12:17 PM	Rate (0)
Gan Posts: 5 Rating: (0)	Thanks for the advice, will try it out
Gan Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

9/13/2010 6:12 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	it is a pleasure to help you
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on