Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Does Hydroranger support volume pulse output for OCM?

Created by: AutoGen_940711 at: 6/13/2022 1:04 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

6/13/2022 1:04 PM	Rate (0)
AutoGen_940711 Member Joined: 4/28/2015 Last visit: 10/19/2023 Posts: 1 Rating: (0)	Hi Can anyone tell me if I can have a relay output pulse for a volume in an open channel measurement application?

Suggestion To thank Quote Answer

6/14/2022 4:36 AM	Rate (0)
danw Gold Expert Joined: 3/28/2010 Last visit: 11/8/2024 Posts: 1074 Rating: (214)	For Open Channel Flow, the totalizer is the source of flow totalized volume data. The totalizer can trigger an output relay on the basis of the totalizer value See the HydroRanger manual for information on the totalizer and the flow sampler; about 5 pages of details. Attachment and flow sampler.JPG (531 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_940711

6/27/2022 9:41 AM	Rate (0)
LevelWac Member Joined: 4/27/2015 Last visit: 10/31/2024 Posts: 34 Rating: (4)	Hi there, yes, it is possible as Dan alluded to. If you need more specific information for your application and product, don't hesitate to open a Support Request with your application information and we will help you program the device to do exactly what you require. Stay safe, Richard Deal (LevelWac)
	Richard Deal \| LevelWac Technical Support - Level and Dynamic Weighing -> send us your Support Request here: https://support.industry.siemens.com/cs/my/src?lc=en-ww Richard Deal \| LevelWac Technischen Support - Füllstand und Dynamische Wägetechnik -> schicken Sie uns Ihre Support-Anfrage hier: https://support.industry.siemens.com/cs/my/src?lc=de-ww
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on