_Abhi_

Plz help in reading the binary input and output status on BOP. I have attached screenshot for your reference 

Hello,

Please refer attached sheet which will help you to identify bit numbers of control & status word on BOP 7 segment display. In attached snap bit no 13 is ON i.e. HIGH.

Hope this helps.

PISCEAN 2010

Hello,

Please refer attached sheet which will help you to identify bit numbers of control & status word on BOP 7 segment display. In attached snap bit no 13 is ON i.e. HIGH.

Hope this helps.

 In which parameter I have to look after. Its a Micromaster 440 drive.

Hello,

r054 - Control Word 1

r055 - Control word 2

r052 - Status word 1

r053 - Status word 2.

PISCEAN 2010

Hello,

r054 - Control Word 1

r055 - Control word 2

r052 - Status word 1

r053 - Status word 2.

 These four parameters cover all input output status of drive or there are still some parameters through which we can view status on bop display?

Hello,

Control word & Status word bit information can be checked on BOP which helps user for trouble shooting. Apart from this, user can view parameter setting values, process parameters - specially r parameters help user to check online values like motor actual speed, current drawn, output voltage, frequency, DC link voltage, torque, motor temp etc. etc. 

Please refer Parameter List: MICROMASTER 440 manual for more detail information.

Hope this helps.