Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s7-200 224xp PTO

Created by: Undron at: 5/3/2023 5:35 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/3/2023 5:35 PM	Rate (0)
Undron Member Joined: 12/17/2020 Last visit: 6/4/2023 Posts: 5 Rating: (0)	Hello I have a problem When configuring PTO through the Position Control Wizard (by pressing NEXT all the time, without creating anything else). After compile all (no error) and download the program to PLC. After - red lights up SF/DG. Open PLC-->INFORMATION: ERROR NON-FATAL: 82 (ILLEGAL INSTRUCTION, CHECK INSTRUCTION MNEMONICS.) (IN PTO0-CTRL, AT NETWORK …) Does anyone know what is the problem?
	Last edited by: Undron at: 05/04/2023 16:57:34
Suggestion To thank Quote Answer

5/4/2023 6:43 AM	Rate (0)
Henry1675 Bronze Member Joined: 3/9/2018 Last visit: 11/8/2024 Posts: 192 Rating: (15)	Please provide the exact S7 200 PLC model name and number. "224x" is not a valid model name. By google this error i get to this Siemens topic: S7200 non fatal error(82) It seems you use a CN version.
	Last edited by: Henry1675 at: 05/04/2023 06:44:27 Last edited by: Henry1675 at: 05/04/2023 06:46:23
Suggestion To thank Quote Answer

5/4/2023 5:03 PM	Rate (0)
Undron Member Joined: 12/17/2020 Last visit: 6/4/2023 Posts: 5 Rating: (0)	Yes. S7-224xp CN Thanks for the link

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on