Hello Team,

I am facing a peculiar problem while uploading backup from S7 1516-3 PN/DP CPU.

The devices are getting detected in scanning, but while uploading out of 04 nos of G120 devices, only 02 Sinamics G120 devices are getting uploaded. So when I tried to upload from CU320-2PN Controller, it's giving error that:
"Working with the PLC loaded from the device may only be possible with the restrictions, since the PLC was previously loaded with the following installed products from a different project environment/
gsdml-v2.31-siemens-sinamics-_s_cu3x0-20140313.xml/
Could not determine type of Module -40A1 Sinamics S120(gsdml-v2.31-siemens-sinamics-_s_cu3x0-20140313.xml) offline./
Upload aborted while uploading from device(error: 1; warnings:3)"

I have tried to find the GSD but the version found is of 2022. I uploaded the backup using Starter, created customised GSD also but that didn't work out with the TIA Portal V17. The attachment shows the error message.

I also searched the Support Forum but nothing found to exactly solve the problem!

So if anyone has resolved the issue please let me know!

Regards
OmKris