Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6es7841-0cc05-0ya5 is showing in order number

Created by: AutoGen_5669226 at: 10/22/2023 1:01 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/22/2023 1:01 AM	Rate (0)
AutoGen_5669226 Joined: 10/22/2023 Last visit: 10/27/2023 Posts: 4 Rating: (0)	Hello All, As i am new in PLC programming, i was simulating plc programming. There was the error, which says "Module is in operation STOP MODE". When i have run the PLC hardware diagnostic, i have found the CPU order number is differ, which i assigned in HW configuration i.e 6es7841-0cc05-0ya5 is showing in order number, instead of 6ES7 313-5BG04-0AB0. Also there is 3 event which was showing in diagnostic buffer i.e 16#530D, 16#430E & 16#4309. Previously, it was working fine. Can you please help me out on this?

Suggestion To thank

10/23/2023 10:59 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject 6es7841-0cc05-0ya5 is showing in order number is published within the conference STEP 7 Additional Software. Best regards, Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on