Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

pid compact

Created by: sukhoi at: 10/24/2023 11:16 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/24/2023 11:16 AM	Rate (0)
sukhoi Advanced Member Joined: 11/19/2011 Last visit: 10/11/2024 Posts: 88 Rating: (1)	hello its my first time with pid controller in TIA and i have a question about pid compact modes (manual,automatic,fine tuning ...) how and when to use them ? best regards

Suggestion To thank Quote Answer

10/24/2023 1:51 PM	Rate (0)
Pcg97 Joined: 7/27/2023 Last visit: 11/11/2024 Posts: 82 Rating: (4)	Hi, The PID Compact has several operating modes, although the main ones are manual and automatic: 1. Manual: If it is in manual mode, the PID outputs the value entered into the "Manual Value" input. 2. Automatic: Once tuned, depending on the input value it will output a value to the output. To tune it you must follow the steps indicated in the manual. To do this, the PID must be in manual mode. Then you must enter a setpoint with an increase of approximately 50%. In "Commissioning" click on "start" monitoring and "start" in Tunning mode. First, you should do pretunning and then fine tuning. - Commissioning PID_Compact V2: https://support.industry.siemens.com/cs/es/en/view/109815056/88912703243 It is important to insert the PID in a cyclic OB. FAQ: https://support.industry.siemens.com/cs/es/es/view/100746401/en

Suggestion To thank Quote Answer

11/3/2023 9:14 AM	Rate (0)
sukhoi Advanced Member Joined: 11/19/2011 Last visit: 10/11/2024 Posts: 88 Rating: (1)	Hi thank you,could you please elaborate on the tuning part?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on