Navigation

ET200SP Overtemperature-Reintegration required

Created by: Shahab_6448015 at: 5/27/2024 5:27 AM (1 Replies)

5/27/2024 5:27 AM	Rate (0)
Shahab_6448015 Advanced Member Joined: 12/8/2016 Last visit: 10/12/2024 Posts: 86 Rating: (0)	Dear all expert, during the configuration of ET200SP i have countered with a fault in "Digital output module F-DQ 8x24VDC/0.5A PP HF. I saw overtemperature in diagnostic status and then remove all the wires, so try to use ACK_GL and Ack for reintegration, but we have still same issue. please check and let me know the solution. Best regards. Attachment D03.2595_2.jpg (246 Downloads)

Suggestion To thank

5/27/2024 10:40 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject ET200SP Overtemperature-Reintegration required is published within the conference Decentral Peripherie. Best regards, Jen_Moderator

Suggestion To thank