Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLC not downloading system block

Created by: sairu at: 9/6/2024 8:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/6/2024 8:08 AM	Rate (0)
sairu Joined: 7/15/2023 Last visit: 10/14/2024 Posts: 1 Rating: (0)	PLC not downloading with system block. PLC will getting unspecified error. ------------------------------------------------------------------------------------------ Split from CPU S7-200 Smart- ST60, "Error found- Port could not be opened or being used by another application". Attachment AAAA.jpeg (148 Downloads)
	Last edited by: Moderator_Lan at: 09/06/2024 09:42:42 New subject after splitting
Suggestion To thank Quote Answer

9/6/2024 11:03 AM	Rate (0)
JimHalpert Joined: 7/11/2024 Last visit: 11/6/2024 Posts: 55 Rating: (5)	Hi Sairu Are you using S7-200 Smart? As it is a product for the Asian market, you could try changing the language to chinese. Hope it works!
	If this comment was helpful, be sure to rate it! Thanks
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on