Industry Online Support
Technical Forum
Navigation
SIPLUS S7400FH --------Approved for Marine Industry??
Created by: Iam at: 1/6/2010 1:19 PM (3 Replies)
Rating 
Thanks 1
4 Entries
| 1/6/2010 1:19 PM | |
|
Posts: 80 Rating:
|
Hi Everbody, I need to know whether Siplus S400FH is marine industry certified or not. Iam |
| 1/6/2010 2:34 PM | |
|
Posts: 80 Rating:
|
|
| 1/6/2010 3:27 PM | |
Joined: 9/27/2006 Last visit: 11/16/2024 Posts: 12294 Rating:
|
Hello Iam; The following is an extract from the S7-400 Module Specifications manual, and shows a llist of all marine certifications attributed to the S7-400 family. The RINA certification that you mention does not appear in the list, strangely; but it can be found in the Support webpages: http://support.automation.siemens.com/WW/view/en/19860867 I do not believe the S7-400H CPUs have any additionalcertification for the redundancy functions, the S7-400H manual refers to this list. Hope this helps, Daniel Chartier |
This contribution was helpful to
|
|
| 1/11/2010 9:18 AM | |
|
Posts: 80 Rating:
|
Hi dchartier, found the RINA one but its expired last year ,,,,,,,dont know if the new one is available http://support.automation.siemens.com/WW/view/en/19847288 cheers...... Iam |
Last edited by: O_Moderator at: 9/16/2010 2:33 PMlink edited |
|
Follow us on