Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Use of scale function

Created by: Draxelmaier at: 11/21/2006 12:27 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/21/2006 12:27 AM	Rate (0)
Draxelmaier Posts: 27 Rating: (0)	Hello I want to use the scale function to apply the output to the analogical module so that this value of exit does not exceed interval [0 10] VDC. The value to be scaling is Vequivalent, the interval of variation is Difffer_tension=10VDC, the value inferior of tension is Tension_inf and the tension after scaling is Vout. Knowing that the output is coded on 12 bits, I tried to make this example in attachment. Can you correct or help me. Thank you.... Attachment Scale.JPG (486 Downloads)
Draxelmaier Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

11/21/2006 4:27 PM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	Hi, What happens if you use AC3 and AC4 instead of only AC3?
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

11/21/2006 8:40 PM	Rate (0)
Draxelmaier Posts: 27 Rating: (0)	Hello all member It’s not a probleme (AC0 or AC1…), but I don’t know the signification of real number 27648.0 Thank you...
Draxelmaier Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

12/1/2006 4:38 AM	Rate (0)
TICMASI Posts: 13 Rating: (0)	dear Draxelmair the number 27648.0 is a real number of the max digital conversion of analog input. [:xxx:]
TICMASI Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on