Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Both TD100c and PG on 222CPU

Created by: gtheodo at: 1/4/2007 9:10 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/4/2007 9:10 AM	Rate (0)
gtheodo Regular Member Joined: 8/22/2006 Last visit: 10/18/2024 Posts: 13 Rating: (0)	Dear all, Happy new year. I own a s7-200 222 DC/DC CPU and I recently bought a TD100C HMI panel. As known this cpu has only one 485 port (PORT 0). Is it possible to have connected the panelandmy laptop witch I use as PG (USB to 485 cable) at the same time to monitor my program and using the panel in my application? Best regards, George

Suggestion To thank Quote Answer

1/4/2007 9:47 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/14/2024 Posts: 8768 Rating: (1171)	Hi gtheodo, Happy new year. It's possible if you use Profibus cable and Profibus connectors with PG-socket. See also following link: http://support.automation.siemens.com/WW/view/en/5126815 Hope this will help. Best regards, Wizard

Suggestion To thank Quote Answer

1/4/2007 11:35 AM	Rate (0)
gtheodo Regular Member Joined: 8/22/2006 Last visit: 10/18/2024 Posts: 13 Rating: (0)	Dear Wizard, Thank you very much for you help. Best regards, George

Suggestion To thank Quote Answer

1/4/2007 11:55 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/14/2024 Posts: 8768 Rating: (1171)	Hi George, You are welcome Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on